Tackle Warehouse Pros Picks for Summer Bassin

Tackle warehouse

Pro’s Picks For Summer Bassin’

Froggin’ With Chris Lane

With summertime upon us, there are many ways to find some fun in the sun action. For fishermen tying on their favorite frog and hitting the water – the excitement of that visible blow up is one of the best ways to spend the hottest season of the year.”Froggin’ that’s easy,” said Lane. “It’s pretty simple, you just have to listen to the fish and let them tell you what they want. Other than that, it’s just about the most exciting way you can fish. It is definitely a favorite technique of mine.” 

Lure Selection & Presentation:

Having already iterated the frog as a fave way to land lunkers, Lane explained the two types of the frog imitations that he uses as toad temptations. “There are two kinds of frog fishing,” he stated. “There is the floating frog and there is the swimming frog. A floating frog like the kind made at Snag Proof are made for grass mats. I fish a Bobby’s Perfect Frog for this kind of fishing, except at Guntersville. When I’m fishing a floating frog, I’m looking for thick matted grass that the fish are in and work it real slow. When I’m in scattered grass or sparse vegetation by logs, I want a swimming frog. I use a Luck E Strike swimming frog.” Lane continued his differentiation of the two types of froggin’ as the relate to tidal water saying that he opts to throw a swimming frog on edges of vegetation when the water has moved out and then changes to the floating frog on tops of mats as the water depth rises.

He described the variation on working each type of frog. “With a swimming frog, just reel the entire time unless you see a bass just under it, but not striking,” stated Lane. “If you see that, just pause and let it sink a little, then pick right back up reeling and wait for it to explode on it. The floating frog is a reel, twitch, sit, let them come it get retrieve.” When setting the hook, Lane always gives a two-second wait time after the frog disappears. If he finds he is missing fish after a blow up, he said, “wait longer.” Offering an extra two seconds, before setting the hook could make the difference in those “ones that got away stories”.

Chris Lane’s Guntersville Frog:

As for the inspiration for the Guntersville Frog that Lane developed with Snag Proof he stated there was no fishery that could compare to his home water, – Lake Guntersville in Birmingham, Ala.”We, as fishermen – are funny,” said Lane. “We always think we can do something different, something that swims better or has a better hookup or a bigger strike. I knew that was something that could be done with a frog on Guntersville. That place has world-renowned, forage frog fishing. Anything can happen there. It holds big, big bass. The anticipation that an angler feels as soon as you throw that floating frog over a mat, is incredible. “The amount of mats and type of vegetation is the best; there just isn’t any place like it. It needed a different kind of frog.” He described the mats as thick, but hollow underneath allowing a space for the fish to get up underneath. He explained his ideal mats saying he looks for ones that are look as though they are dying and have the appearance of “dried out”. Describing the hopper that he created for Guntersville, he said the legs are weighted to depress the thick mats indigenous to the fishery and said that they can come with rattles as well for an added, audible attraction for the bass to track the bait. His personal best on his home water invention went 10-lbs.

Frog Gear:

Standard supplies and setup Lane uses for froggin’ is a 7’2″ All Star Rod with a 6.3:1 Abu Garcia Revo reel. “I want a stout rod for frogs,” he stated. “I use 50-lb Stren Sonic braided line. If the frog bite is really, really good, I may move up to 65-lb, but that is very seldom. I use 50-lb, because I can cast farther with it.”

Click Link To Shop: Bass Angler Magazine


Froggin’ With A Champ Summer 2013 Bass Angler Magazine (Jody Only pg. 32 – 33)

Jason Christie’s Summer Lure Selection

You’re not the only one sweating this time of year; the bass are just as warm and seeking refuge in cooler oases, namely, deeper water. Speaking of hot things, Elite Series pro Jason Christie is darn near on fire. With two major wins under his belt for 2013, he’s made the biggest splash in bass fishing since the Alabama Rig. He says that during these months, most fish will be offshore in deeper water, likely in the 15- to 20-foot range. “The key to finding fish now is using your electronics and covering water,” the Oklahoma pro says. “With Lowrance’s StructureScan and the like, it’s easy to look at a lot of stuff, and I don’t typically cast until I see fish on the graph.” 

Heddon One Knocker Spook:

“This is one of the best baits to use the first thing in the morning to cover lots of water. Plus, it gets big ones,” Christie says. “Chuck it around shallow cover and see what they show you. Also, if you’re fishing offshore, you never know when they’ll come up schooling, and this is one of the best baits for that situation.” Christie keeps a pearl shad Spook on deck all day.

Bomber Fat Free Shad:

Christie likes the BD7 Fat Free Shad to really cover some ground. “A lot of your fish are going to be offshore on ledges, and I throw this 90 percent of the time in practice,” he says. “When you’ve found a school, this will fire ’em up. The key is to reel it as fast as you can. A lot of people just reel it, but it’ll be work if you’re doing it right.” Foxy shad is his go-to color.

Yum Money Minnow:

Once he’s found a school of fish on his electronics and the Fat Free Shad has quit working, Christie goes into “cleanup” mode with a swimbait. “If you’ve got that school fired up, you can catch 10 fish in 10 casts,” he says. “But once that dies, you need something more subtle to roll through ’em, and this is it.” He likes a 5-inch shad color (such as foxy shad) on a 3/4-ounce jighead.

Yum Wooly Bug:

Not every fish in the lake is going to be deep, so Christie prepares for a shallow bite with a soft plastic tailor-made for flipping. He rigs the Wooly Bug on a 5/0 TroKar flipping hook and pegs the getup to a 1/2-ounce sinker. “This is my go-to in river systems and in and around shallow stuff,” he says. “It’s good for hydrilla, laydowns, pads – whatever’s there and fishy-looking.”


What Jason Christie Throws In July And August July/August 2013 Bassmaster (David Hunter Jones pg. 26)

Three Keys To Unlocking Summer Bass With Mike Iaconelli

Summertime fishing will strike most part of the country during the months of June, July and August. Iaconelli explained it simply by fishing during the warmest air temps and warmest water temps of the year and stated there only three things that an angler had to keep in mind to set themselves up for the best summer bass bounty that they could achieve. “I say these three things over and over and over in my head, no matter where I am fishing,” said the 2003 Bassmaster Classic champ. “There are three main patterns and these are the three things that I think about – deeper, thicker and current. That’s it. Simple as that – deeper, thicker, current.” 


Iaconelli started off explaining the “deeper” pattern saying it is the primary summertime pattern. He then explained that there are three reasons that bass go deep in the summer. The first to find cooler water. “At this time, the surface temp of a body of water can go up to the 80’s, 90’s or even into the 100-degree range,” he stated. The second reason a bass will go deeper is due to stratification. He explained saying, “As this occurs, oxygen levels will deplete in shallow zones and as a matter of survival, fish will go deeper to find more oxygen.” Lastly, a bass will follow their food source and as they found their meals shallower in the spawn, that forage will move deeper as the water warms. “It is just like wolves, it doesn’t matter what kind of baitfish it is – shad, yellow perch, alewife – they all move deep,” he added. While Ike stated there is not one bait across the board that is best for the deeper pattern, due to the vast difference in depth range that deep could equal, he did recommend two baits for areas that are 20- to 25-feet or deeper. “You do need a specialized bait when targeting fish that deep,” he continued. “The first is a deep diving crankbait and the second is a football head jig. The important thing about these two baits are that they can trigger a reaction strike. When bass are deep, they typically feed in low light or nighttime conditions and most of the time, we are on the water in the day. That is why, I want something that is really good at triggering a ‘non-feeding’ fish to bite.”

Ike’s Deeper Lure Selection & Gear:

Ike’s preferred deep diver is a Rapala DT. “The ‘DT’ means ‘dives-to’,” said Iaconelli. “On my lake, I’m using a DT 10, because it dives to 10-feet. At Kentucky Barkley, if I’m on an 18 or 20-ft ledge, I’m using a DT 20.” For the next bait – the football head jig – Ike uses the Berkley Gripper Jig. “I like it because it is a tremendous reaction bait,” he continued. “It lets me get past that normal barrier of 20 or 25-ft. You need that in many places, like the Great lakes or the deep mountain lakes out West. A crankbait loses its effect when you’re deeper than 25-ft. I use a 1/2 or 3/4-oz jig. My jig trailer in the summer is different too. You want a lot of action in the summer vs. a more neutral action in the winter. The high-action trailer I like is a double tail grub. Berkley makes one in the Havoc line called the Deuce. It is just a bigger, beefier grub.”

Favorite gear for fishing his deeper baits were specific. “Fishing a deep crankbait is more specialized, because of the super-long casts that you need to make,” he said. “I use an Abu Garcia Veritas – a really long 7’11” rod in the Winch series. It has a softer action to achieve maximum diving depth and the needed long casts. I also like a reel that holds a lot of line and has a slower gear ratio, especially with a big crankbait like the DT 16 or DT 20. I use an Abu Garcia Revo Winch with that big spool in a 5.1:1. That slow gear ratio helps you fish that big bill. I use 10- to 12-lb Berkley 100% Fluorocarbon because of the density it sinks, getting deeper for bottom contact.” He throws his jig with a 7′, medium-heavy Veritas with a 7.1:1 Revo Premier reel for quicker line pick up. He upsizes to 15 or 17-lb line for his Grippers.


“This can throw people off, but even in the heat of the summer, after the spawn, even if the water is 80, 90 or 100, if there is available thick cover, some fish will remain shallow,” noted Ike. “That is where the second pattern comes into play – the ‘thicker’ pattern. Thick is relative depending on where you are. In Florida, on Okeechobee, Kissimmee or Toho it might be the grass – hydrilla, milfoil, reeds, etc. In California on the Delta, it might be hydrilla, milfoil or duckweed. In other places there might be no grass, but there is cover, like Lake Wylie in North Carolina. There isn’t a stitch of grass there, but there is a ton of lay down trees. In other places, like Lake Norman in the Carolinas, has 1000’s of docks. If you look, they provide shade, overhead cover and keep the water cooler. It’s even better if you can find a dock near a fresh water run-in. Look around the thickest part of the cover in the shallow zones for minnows, shad, crawdads, etc. Locate the thickest part of the cover, if you’ve found baitfish there should be some bass.”

Ike’s Thicker Lure Selection & Gear:

Ike’s punch’ rig includes a 3/8 to 1 1/2-oz VMC tungsten weight . The thicker the cover, the heavier the weight. The color of his weight relates directly to what he is trying to imitate. “If there are bluegills or craws around, I will use realistic colors like muted greens or blacks,” he said. “You don’t see silver on bluegill or craws. If I’m trying to imitate an alewife or emerald shiner around a dock, I’m going to use a smoke or silver. I want the package to look as real as possible.” He uses a VMC Bobber Stop and a stout flippin’ hook that he helped develop – the VMC Ike Approved Heavy Duty Flippin’ Hook in 3/0 or 5/0, depending on bait size. “There are lots of different plastic creature baits out there,” said Iaconelli. “I use the Berkley Devil Spear. It’s amazing for punchin’. It has a nice compact body with no appendages, no arms or curly tails. It is streamline, like a spear, with deep grooves. Those deep serrated ribs catch water on the fall making the tail shake back and forth. I use the regular 4 1/4-inch size with a 5/0 VMC hook, when I see adult size craws and bigger bluegill. I use the smaller 3 1/3-inch size with a 3/0 VMC hook when I see smaller minnows or grass shrimp. I’m always trying to match the hatch.”

He ties on with a snell knot and noted that up until eight or so years ago he used a Palomar. The switch in knots increased his hookup percentage by at least 30 percent. He also stated that the VMC hook he helped create has two keeper barbs that were specifically designed to be positioned 1/8 of an inch below the eyelet of the hook to allow room for the snell knot. Punch gear for Iaconelli is a medium-heavy, 8′ Veritas. I like this long heavy backbone which is about 80 percent o f the rod,” he added. “Twenty percent has a little tip which is good for casting. This is a close quarters bait and you’ve got to have a fast reel. I use an Abu Garcia STX 8.1:1. Seventy percent of the time, he punches with 50- to 65-lb Spiderwire Stealth braided line for thick cover and stained or dirty water. The remainder of the time he will use Berkley 100% Fluorocarbon. He stated the criteria that would prompt the fluoro would be super clear water with thick shallow cover or super-heavy pressured areas.


“People have in mind certain types of water, when you say current,” explained Ike. “Like current you find in rivers or manmade current from a dam. That is wrong. Every body of water has current, even a natural, bowl shaped lake or pond has current from wind, from boat traffic from movement in the mouth of a canal or in a saddle that is formed a between point and an island. That is important to remember, because by default the current will increase the oxygen, make the water cooler and attract baitfish and forage. Current is the third summertime pattern that I’m looking for and I’m going to go out of my way to find the areas with it.”

Ike’s Current Lure Selection & Gear:

Once again, Ike explained there were many lures and techniques that could be used in the current. He noted that his top-two were a spinnerbait and an Iaconelli go-to the shakey head. “The spinnerbait is a great tool in lots of situations, but I think it may be the best lure in a current situation,” he said. “The blade has movement in current on its own without any action from your rod or your reel. It is often my first choice in summertime cover.” He uses the Molix Water Slash spinnerbait due to its scaled down compact size and the distinctive head design that invokes a unique side-to-side motion or shimmy that Ike compared to a Senko. The majority of the time, Ike ties on a 3/8 or 1/2 oz spinnerbait and said 10 percent of the time it will be a little lighter or littler heavier, depending on the circumstance. As always, he chooses to match the hatch with colors such as fire tiger if yellow perch were in the vicinity or gold if golden shiners were showing themselves and a silver, if the shad were around. Blade styles depended on water clarity. “If it is stained to clear and I can see three or four feet down, I will use a willow leaf, he said. “If it is stained to muddy, like it just rained and it’s chocolate milk and I need more vibration, I am going to use a Colorado. If I want more flash then I’m going to use a willow.” “My finesse standby for current is the shakey head,” said Ike. “It is a classic current bait, especially when you already know they are there and you want to maximize the spot.” He uses the Havoc Bottom Hopper on his shakey head due to its flat bottom design and the gliding and sliding nature.

Ike’s spinnerbaits are fished on 7′ Veritas medium action rod. He chooses this to allow a little more delay in the hookset. His reel is a 7.1 Premier Revo which is versatile allowing him to slow down or burn back. The line is Berkley Trilene 100% fluorocarbon depending – 15-lb for open water, 17 for moderate and 20 for thick weeds. The Veritas 6’6″ spinning rod and the Revo premier spinning reel in the 30size with 8 or 10-lb 100% fluorocarbon seals the deal. “You want a big reel so you can spool your line and still leave about 1/8-inch in there,” said Ike. “Also, you always want to fish up current and then let the bait come back down to you naturally the way the baitfish, crawfish or earthworms would drift towards you – this will double your bites, for sure.”

Click Link To Shop: Bass Angler Magazine

Ike’s Three Keys Summer 2013 Bass Angler Magazine (Jody Only pg. 72- 75)

Flippin’ Summer Bass With John Crews

In a Bassmaster Elite Series event in March of this year, John Crews from Salem, Va. crashed through the ceiling on the 100-lb benchmark. Joining the Century Club for four days on Falcon, his haul of 103-13, was mostly attributed to flippin’ a subtle, plastic creature bait. The plastic responsible for the bulk of his bass action was a Missile Craw. The bait is near and dear to Crews as it one of those launched by his own company Missile Baits that began biz last year. With proof in the pudding, Crews put the Craw to the test and came out on top at Falcon. 


“There are two types of heavy cover,” he began. “First, there is matted vegetation, which is for punchin’. Second, there is heavy wood. Wood is the simplest – it is the nastiest, heavy wood you can find – like a thick, fallen tree. The bass will go into the deepest, darkest spot of that submerged tree. There are also flooded trees and laydowns.” Productive wooded structure can be found in depths from six-inches to 15 or 20-feet. “If you find a flooded tree and you catch one or two or a few fish, you will find the key depth. Then, you can eliminate the wood in deeper or shallower areas. The fish will tell you how deep you should be.” He elaborated on how the fish setup within the wood explaining that there are times that they are on the bottom and other times they are suspended in the structure or under a limb. “A flippin’ bait allows you to give it to them in either place – in both strike zones,” said Crews.

When deciding which mats hold the monsters, he prefers a mixed mat, going with the more the merrier theory. “If there are tules mixed with the matted vegetation, that is good, if there is hyacinth over milfoil mixed in with the tules that is better, but if there is all that plus hydrilla, that is best. The more types of grass that are mixed in the mats, the better.” Crews goes straight to the heart. He described the best places as where the mat comes to a point or the center. “If I’m in practice, I will go right to the middle or thickest part where the big ones are,” he explained. “If I know the area is good, I will slow down and pick it apart. Once you cast to a spot in a mat, you spook the fish that are sitting between your cast and you, so you have to be careful and decide if you want to fish any of that area before you cast past it.”

Lure Selection:

“For baits, I use a Missile Baits D-Bomb or a Missile Craw,” stated Crews. “There is a distinctive shape and fall and action for these baits. They were developed this way. I use the D-Bomb for a bigger profile. It has more water displacement and a straight fall. I started with this at Falcon. When I didn’t get that many bites, I changed to the more subtle presentation of the Craw. It is thinner with a smaller profile. That makes it fall faster with more of a darting action and a different look on the bottom. Sometimes that is the fish’s preference.” Saying the action and fall rate are more important than the color of the bait, Crews keeps his color choices basic, using red around the spawn, natural shades on sunny days and darker ones in off-colored water. If he finds he is gettin’ bit, but they’re not holding on, he suggests adjusting the color or adding scent. When choosing his weight, Crews opts for a 1/4 to 3/4-oz., depending on how thick the cover is. “The fall rate can make a big difference,” he noted. He prefers flat black weights.


“When you’re flippin’, the bait will take the path of least resistance,” explained Crews. “Pitch it out there in the heavy wood and the fish will find it.” Patience is a virtue when flippin’ wood. “Don’t get in a hurry,” he warned. “You don’t need to set the hook and land the fish in one motion. You need to give them a two second count, before you give them a good, hard hookset and then hold on. They’ll find their way out. They will follow the line and then you can guide them out.”

Flippin’ Gear:

In the wood, Crews spools his Vicious line on a high speed, 7.3:1 Pinnacle LTE casting reel and uses a 7’6″ Pinnacle Perfecta DHC 5 rod. “It is medium-heavy with a fast taper,” he stated. “It bends more than most might like. For me, I like to have enough tip to cast well. I don’t like heavy flippin’ with too stout of a rod. It doesn’t pitch as accurately. I also want a great handle for balance, since I’m fishin’ all day.” Crews inspects his water and visually locates the heaviest wood. When he fishes these types of areas he prefers to tie on Vicious Fishing Fluorocarbon in 25-lb-test. “It slips over wood easier than braid,” stated Crews. “You have to keep an eye out for line abrasion, continually monitoring your line, when you are fishing wood like this.” He ties his flippin’ hook on using a San Diego Jam knot. Some call this the Reverse Clinch. His hook is a 3/O or 5/O Gamakatsu Heavy Cover Flippin’ Hook, depending if he using a smaller or larger plastic. Crews reviewed the differences when flippin’ heavy mats as opposed to heavy wood. “I’m using a heavier weight, a 1/2- to 1 1/2-oz,” he stated. “I still want a black weight for a more natural look. When I move up to a 1-oz weight or bigger, I bump my rod to a 7’9” Flippin’ Stick, because I need a little more backbone for the heavier action. Sometimes, I darken my line a few feet. I use Vicious 50- to 65-lb braided line for vegetation. I use the same hook, but tie it on with a Snell knot. I use the same plastic baits, but use darker colors.

Click Link To Shop: Bass Angler Magazine


Crews And The Craws Summer 2013 Bass Angler Magazine (Jody Only pg. 40 – 42)

Fishing The Pads

Once the calendar hits late June on through September, one thing is consistent with catching bass and that is VEGETATION! Depending on where you are fishing, the forms and amounts of vegetation to fish are endless, but I’ve found one form of vegetation that always seems to hold not just bass, but quality-sized bass. That is lily pads. Why do lily pads have this aurora to them? There are several reasons. One is that they provide bass with adequate cover, both from the sunlight sinning into the water and also it provides them with an ambush point to feed, which leads us into the second point. The amount of activity that goes on around lily pads is so vast. To the angler’s eye, much goes unseen. Small insects will gather on to these floating green circles and in turn bring in bluegills, sunfish, etc., all of which are mighty tasty to a big ole bass! The next time you pull up to a stretch of lily pads, be sure to listen for bluegills popping away underneath the pads. I also feel that lily pads hold quality bass more often than not, because of the water quality and bottom composition where they are growing. Lily pads grow in mucky or silty bottoms up to 5-feet deep. If it weren’t for the pads, bass wouldn’t relate to the soft bottom so it gives them great structure in an otherwise poor area. 


Lily pad fields can develop in many places on your favorite lake or river. Pads can develop in numerous backwater lakes and sloughs on rivers. On lakes, pads will start to pop up in shallow bays and shallow flats, the depth of water that lily pads grow in ranges, but I like to look for areas that have deeper water or ditches nearby. Some lily pad fields can cover several acres and could take a huge chunk of your day fishing to cover. You will want to dissect that area to determine what irregularities are present that the bass may be further relating to.

Certain things I look for are:

* Other forms of cover, such as wood mixed in with the pads
* Pockets of open water located within the pads
* When a section of the pads form a point or indentation
* If there is a depth change in the water under the pads

Frog Lure Selection & Presentation:

My lure selection is based off of fishing the two different areas of the pads, the area that is in the midst of the pad field and then the edge of pads. When I am fishing the area inside the pads, my favorite lure is either a Snag Proof Ish’s Phat Frog or Bobby’s Perfect Frog. With either of these frogs, I can target the bass in the heavy cover and then work it across the pads and let it sit when it comes to an open water pocket. I also like to walk my frog across open water as bass will come out of the lilypads and hit your frog in open water. I like to work my frog with a lot of action, making casts in heavy cover, I use a 7’2” Tessera Series Rod which has plenty of backbone, but still a soft tip, so I can give the frog a lot of action. I pair this rod with a Wright & McGill Victory baitcaster reel with a high speed retrieve, so I can quickly reel in line as a bass makes a run towards the boat and spool it with 60-lb. Seaguar Kanzen braided line.

Flippin’ Lure Selection & Presentation:

When I am flippin’ a creature bait, I am putting this bait right along the edge or sending it to open water pockets between the pads. There are various creature bait designs on the market, but the one common thing that I use is either one in black and blue or green pumpkin. I prefer to use a 1/2-oz. Lazer Sharp Tungsten Weight, so I can make nice long pitches. By using a tungsten weight, it is smaller than a lead weight. To get a solid hook up on these bass when I’m flipping around pads, I like to use 20-lb Seaguar TATSU fluorocarbon, because I believe it’s the best out there. It has low stretch and is super strong. Fluorocarbon coupled with a 4/0 Trokar TK130 Flippin’ hook has dramatically increased my hookup ratio.

Click Link To Shop: Bass Angler Magazine


Fishing The Pads Summer 2013 Bass Angler Magazine (Glenn Walker pg. 70 – 71)

Flutter Spoons & Ledges With Ben Parker

A few years back, Ben Parker faced an intimidating fishing challenge. Side-scan sonar technology had just hit the market, and Parker, a pro angler and guide from Samburg, Tenn., was “lost in the forest.” “I had no idea how this new technology worked, didn’t know how to turn it on,” he remembers. “But I realized it was going to revolutionize deep-water structure fishing for bass, and I had to learn how to use it if I didn’t want to get left behind.” So Parker designed his own self-study program. He bought a new side-scan unit and installed it on his boat. Then he began learning how to examine and fish mainchannel ledges on nearby Kentucky Lake. He recalls, “A friend told me to pick a ledge at random and start fishing it with a football jig. He said when I caught three bass on three successive casts to mark the spot, that there was a school of bass present. Then he said to pull the trolling motor up and drive over the spot and adjust the controls for a better picture of the bottom and the fish. “I repeated this process probably a dozen times, making adjustments until I could see individual fish in the school. When I finished with this process, I could idle over a ledge and tell immediately if bass were present.” In the following year, Parker spent nearly a thousand hours scanning ledges for approximately 80 miles on both sides of the old Tennessee River channel in this huge TVA reservoir. “Once I learned what to look for, I found a mega-school of bass about every three-quarters of a mile. I marked these schools’ locations on my GPS, and I’ve fished them ever since.” (Parker rates a “megaschool” as one holding 100 or more bass.) 


Thus, through his extensive experience at finding deepholding bass, Parker has acquired a comprehensive knowledge of the fish’s habits in midsummer and what it takes to catch them. He adds that his Kentucky Lake tactics are effective on other mainstream reservoirs throughout the U.S. Parker begins, “In the mid-South, most bass head straight back to deep-water ledges as soon as they finish spawning. They will concentrate in predictable areas along mainriver ledges [submerged banks of the old river channel]. Typical depths are 10 to 22 feet deep on top of the ledge and falling to a depth of 35 feet or more.” Parker continues, “The fish collect in these spots to feed on shad. Feeding activity is usually heightened when there’s some current running.”

Lure Selection:

When Parker finds a school of bass with his sonar, he positions his boat downstream of their location and casts upstream. His primary baits are a Nichols flutter spoon (5 inches), deep diving crankbaits, Carolina rigs and jigs. Parker says many anglers know and utilize this pattern in midsummer, and it produces consistently when the current is running and the bite is on. However, he has also learned how to catch these fish when the bite is slow and they are seemingly nowhere to be found. He explains, “The bass don’t always hold close to the bottom on these river ledges. Sometimes they will rise up and suspend just a few feet under the surface over a deep ledge. For instance, they may be hanging 4 to 6 feet deep over a ledge that’s 15 feet deep falling to 35 feet. These are like mystery fish. Most anglers don’t know they’re still there and orienting to the ledge.” Parker says this happens under a definite set of conditions: The surface water temperature is in the upper 80s or higher; current is slack; and big schools of shad are cruising near the surface.


Parker continues, “When these conditions prevail, sometimes I’ll scan places where I know the fish are hanging out, but I can’t see them on the graph. It’s like they’re gone. But before I rule that spot out, I’ll wait a little while, then come back and work it with a spoon to see if they’re hanging close to the surface beneath the shad.” To do this, he returns to the downstream side of the ledge, avoiding motoring over where he thinks the bass should be. Then he begins working the ledge with the flutter spoon, making long casts and retrieving it at different depths to try to contact the fish. “I’m very stealthy when I’m doing this,” he notes. “I keep my trolling motor on low and avoid making any noise that may scare them. It’s like shallow-water fishing.” When his spoon hits the water, Parker raises his rod to let the bait settle on slack line. Then he slowly lowers his rod tip as the spoon flutters down. “I haven’t engaged my reel yet,” he says. “I’m watching my line for some unnatural movement, and I’m also feeling for a bite. I won’t engage the reel until the spoon hits bottom or I get a strike.” If the spoon falls to the bottom, then Parker engages his reel and strokes the spoon off the bottom and allows it to settle again. He works the spoon all the way back to the boat in this manner. If no strike comes, he experiments with different retrieves and depths to discover the fish’s location. “On the next cast, after the spoon flutters down 5 to 6 feet, I’ll start snapping it back to work it nearer the surface. Sooner or later, if they’re there, I’ll find them.” Parker concludes, “It takes a lot of confidence to cast out in the middle of nowhere like this. But believe me, once you learn to read your sonar properly, then master the technique with the flutter spoon, you can load up your livewell.”


The Mystery Bass Of Summer July/August 2013 Bassmaster (Wade L. Bourne pg. 65 – 66)

Punchin’ Tidal Water Bass With Charlie Weyer

Warming weather, matted vegetation, water temps on the rise – it’s time for a punch party – B.Y.O.B. Boat Your Own Bass. Party of two, FLW champions Charlie Weyer and Brian Carpenter met on the tidal waters out west, punch rig and punch rod in hand to pull out some big ol’ Delta bass with a lesson on how it’s done. 


“Outgoing tide is best,” said Weyer. “I would say the first 45-minutes to one hour after the outgoing tide change and the last two or two and half hours before the incoming change. I really like that last part before it really drops off.” He explained that his success on an outgo was due to the bass knowing that the water is moving out and how they position themselves on breaks during that time. He noted that when the tide is coming in and the water is getting higher the baitfish spread themselves out and the bass do the same. His optimum water temp for the technique is 55-degrees or higher. “The hotter the weather, the deeper they go into the cover,” continued Weyer. “In June, July or August, the bass are relating to the main rivers or channels with more current flow. In the main river areas, it is cooler, there are more baitfish and there are deeper breaks and these are things that the bass relate to as the conditions heat up. You may find some of them in backs of coves, but only if they are deeper coves.”

He recommended punchin’ in areas that are within a 1/2 mile to a mile off the main channels or rivers and targeting breaks of 6-feet or less. “I have caught them in a foot or less,” he added. “Especially if that shallow point is near a drop or deeper break. I’ve also caught them in just inches if a hole they’ve buried into is near deeper water. I got a back-to-back eight and a nine in holes on the bank in less than a foot on the California Delta.” As for optimum vegetation, Weyer wants a mixture. “Out west, some guys want to fish the hyacinth,” added the FLW Tour pro. “I love to fish the matted up elodea, but if it is combined with the hyacinth, that is really, really good. It can be a goldmine. If I’m in the Potomac or Louisiana Delta, I am looking for Gator Weed, milfoil and hydrilla.” Finding most production in the center, Weyer goes right to the middle of the mat. “That is where the big fish live,” he stated. He also expressed his liking for small patches of grass rather than big masses.

Lure Presentation:

“The fall rate of how they want the bait is important to figure out and keep in mind, they can change how they want it,” he added. “Sometimes they want it to feather down, other times they want a quick fall. Sometimes they will strike when you hop it on the bottom, sometimes they strike at a shake. The fish will have to tell you what they want at any given time. I start with a drop and hop and go from there. If I’m not getting’ bit, I will try the shake. A lot of times you get bit on the fall, right away, before it ever hits the ground. But, other times you have to give it some effort, you cannot just pitch in there two or three times and move on, give it 10 or 20 casts. It depends on the pressure. If you miss one, definitely don’t move on. Pitch back in there. If no success, leave for 15 or 20 minutes and come and try again. You can still pick up that fish.” Pitch, drop, hop, shake – somewhere in there, you will feel the bite. When it happens, Weyer’s best advice was to WAIT. “Don’t set the hook immediately,” he warned. “Give it a quick one-two count and then set. You want to give them enough time to turn their head, so you don’t pull the bait out of their mouth.”

Punchin’ Gear:

Getting’ his gear together, Weyer brings out a 7’10” to 8-ft rod. “I like a medium-heavy rod and I like a little bit of a soft tip that lets them take the bait, so it doesn’t jerk out on the set,” he stated. He uses 60 or 80-lb braided Seaguar Kanzen line with six to eight feet of it blacked out with a Sharpie, he ties on his punch rig with a Snell knot and a 4/0 or 5/0 Gamakatsu Super Heavy Cover Flippin’ Hook. The weight he uses is a black Penetrator weight. His preferred weight sizes are 1 to 1 3/4 oz. “Mostly, I will use a 1 3/4oz,” he stated. “I will go to a 2 or 2 1/2 oz if the wind is really blowin’.” He adds one or two Paycheck Baits Punch Stops to his punch rig, depending on the size of the weight. His hook size changes with his bait size or also if he finds he’s getting bigger bass to bite when he is using the 4/0, he will go to the bigger hook. To beef up the profile, there are times that Weyer adds a skirt. “Sometimes I use a Paycheck Baits Punch Skirt, sometimes I will use a homemade one,” he stated. “It is about 50/50, if I use a skirt. The ones I make myself are just a spinnerbait or jig skirt material. I make them in green pumpkin with red flake, like a California 420 color. I use that when I’m around bluegill. I make a blue/pumpkin color or black and red for when I’m around crawdads and a black with silver flake when I’m around shad. The coloring really depends on the baitfish or food source that I’m finding in the areas that I’m fishing. There are some differences depending on what part of the country that I’m in too.”

Click Link To Shop: Bass Angler Magazine

Punch Party – B.Y.O.B. (Boat Your Own Bass) Summer 2013 Bass Angler Magazine (Jody Only pg. 50 – 51)

Shallow Bassin’ During Dog Days Of Summer With Terry Bolton

Sweltering heat and humidity are the norm during a typical summer, which has the effect of driving bass to deep water on the main lake. Off-shore ledges, humps and deep points are excellent places to locate bass during these times, but FLW Tour Pro Terry Bolton says anglers should not ignore shallow water, even in summer’s heat.”Most of your major creeks on any body of water have two populations of bass,” Bolton explained. “There is going to be a transitory group, who move in to spawn and then move back out. There is also going to be a resident population of bass that live in these creeks year round. They have everything they need in the creek; Deep water, shallow water, food and cover. They don’t need to go anywhere else.” 


The first place the Paducah, KY native is going to look when searching out shallow water largemouth is in one of the major tributaries with a sizeable creek flowing into the back of it. This water will have a little more color to it and that dirty water is the key to shallow fish. It will be slightly cooler than clear water and it gives the fish a sense of security in the shallows. “I really like to find that dirtier water,” Bolton said. “With a little stain in the water these fish are more apt to stay shallow. You can find this water sometimes in the back half of the creek, but more often it is going to be in the back 1/3.” Bolton likes to target any visible cover he can find. Brush piles, stake beds, stumps, laydowns and patches of grass offer great casting targets and will usually have fish on them. Shad fry from the spring spawn will usually locate near this cover on the shallow flats which is another factor for bass.

Lure Selection & Gear:

He likes to cover water quickly in these shallow areas looking for active fish. He will generally have three lures to aid in his search; a small spinnerbait, a lipless, rattling crankbait and a shallow running square bill crankbait. Of the lures he likes for covering shallow water quickly in the summer, his first choice is a 1/4 ounce lipless crankbait.

For both the lipless crankbait and the square bill crankbait he will use the same rod, but changes the gear ratio on reel for the two baits. He fishes these lures on a 7-foot medium-heavy Denali cranking rod. For the lipless bait he will use a 7:1 Lew’s Tournament Pro Series Reel. He opts for the faster gear ratio in order to keep the bait off the bottom and he will spool the reel with 17- or 20-pound Gamma monofilament. His reel for the square bill crankbait will be a 5:1 gear ratio wound with the same heavy monofilament line. For Bolton, the heavy mono serves two functions. “Monofilament line floats so it will help you keep the baits off the bottom in this shallow water,” he explained. “Another thing it helps on the square bill crankbait is if you get hung up, which happens around all this shallow cover, you can pop your line and because monofilament has stretch, a lot of times it will pop loose.” His spinnerbait of choice will be either a 1/4 or 3/8-ounce Picasso spinnerbait, usually with double blades but at least one will be a Colorado blade to put off more vibration in the dirty water. He fishes this on a 6-foot, 10-inch Denali spinnerbait rod with the Lew’s reel sporting a 6.4:1 gear ratio to enable him to keep the bait moving quickly in the shallow depths.

Shift Gears, Slow Down & Flip:

He will fish through an area fairly quickly, but if he gets a few bites or just has a good idea they are there and won’t bite the crankbait or spinnerbait offering, Bolton will often go back through the area and begin flipping to the various targets. “A lot of times in that dirty water you are going to leave some fish because you are going through so fast,” he explained. “When you go back through and fish that same cover the fish that were there might have gotten active or some other fish have moved in. For whatever reason, going back through and flipping seems to catch fish for me. When I flip to these targets I don’t just make two or three flips and move on, I like to make multiple casts. Sometimes it might take seven or eight cast to one side of a log to trigger that fish to bite.”

Flippin’ Baits:

While Bolton may opt to flip a jig, tube or creature bait, much like many anglers, he often chooses a large plastic worm. He often goes with an extra-large 10-inch worm which some people find unusual, but for Bolton, it pays big dividends. His worm of choice is a Trigger X ribbon tail. He will Texas rig it with a 1/4- or 5/16-ounce VMC Tungsten weight and a VMC hook. He flips and pitches the worm and retrieves it just like he would a jig, letting it fall along the cover and giving it some action with the rod tip. “Don’t ever hesitate to take a big 10-inch worm and flip it in a foot of water in the summertime,” he said. “A lot of times when they won’t bite anything else, they will bite that big worm. I am not really sure why, but summertime is worm time and I think a lot of the reason they bite it is because it is a big profile and it is a little more subtle movement. I cannot really explain it, but it works.”

Click Link To Shop: Bass Angler Magazine

Shallow Water Bassin’ In The Dog Days Of Summer Summer 2013 Bass Angler Magazine (Tim Tipton pg. 16 – 17)

Targeting Shallow Hot Water Bass With Chad Morgenthaler

I first developed my skills as a shallow water angler while fishing Midwestern lakes. Not by accident, but by necessity. I had little to no experience with deep water structure and back then I didn’t have the equipment to effectively find or catch them. So, I worked with what I had available. What might be considered a deficit to some, turned into an opportunity to learn. It enabled me to hone skills and broaden my understanding of bass habitat and their relationship with different types of structures especially during the summertime. 


Vegetation, laydowns and rocks all play an interact part in a bass’ life. It’s uncommon to think that when the water temperature exceeds 90-degrees a bass would want to position in less than 2-foot of water, but they do. Here is my understanding of why: As the summer days lengthen and the water temperature rises, the deep water will remain cooler. Although the water in this area of the lake is cooler, it also provides bass with less oxygen and few options for food. During the long, hot days when sunshine is prevalent for 10-plus hours, the photosynthesis process is at its peak. It stands to reason that this creates the desired situation for not only bass, but also the food chain they follow. I found the most productive areas normally have the heaviest amount of vegetation creating the most shade and the highest oxygen content. From the bass’ perspective, they also offer great ambush points. I’ve found the most productive areas to be main lake stretches. Don’t count out small pockets and fingers especially early morning, late evening, or on cloudy days when the barometer is moving. The main lake is always the most productive in the summertime, because it offers the coolest temperatures and has the freshest water supply. This area receives the highest rate of traffic from fishermen, leisure boaters and jet skis, which creates water movement and aeration. The big necks and most creeks don’t have as much activity and tend to become somewhat stagnant.

Lure Selection & Presentation:

Typically, I approach this situation by starting off the day with fast moving baits such as the original Lunker Lure buzzbait in 3/8-oz coupled with a Reaction Innovations Skinny Dipper as a trailer. I spend the first hours searching for productive areas, covering as much water as possible while trying to capitalize on a morning bite. This combo is known for catching large bass, but more importantly, it has a strong resemblance to bait fish. Look for sparse vegetation areas located close to heavy vegetation. Specifically, try to identify where bass will spend the majority of their day. As the day progresses, I turn to my strength using a big flippin’ stick and heavy line. I prefer 20-pound fluorocarbon with an 8-foot flippin’ stick and Lew’s Super Duty reel. I alternate between 1/2-ounce and larger Lunker Lure Triple Rattleback Monster Grass jigs and Missile Bait D Bombs with a 5/16-ounce or larger tungsten weight. These baits are designed for heavy cover and will easily penetrate the thickest areas that I like to target.

Using the jig during my first pass will normally trigger a larger more aggressive bite while ensuring a good hookup. To show a different presentation, I’ll use the D Bomb when making a second pass through a productive area. The D Bomb also works really well in heavily pressured areas. It receives more bites while still catching quality size fish. Every angler has their go-to colors mine are black/blue on the jig with a blue sapphire Zoom Big Salty Chunk trailer. This combination works great in almost any water clarity, especially since the areas I target with jigs are normally dark in nature whether from water clarity or dense cover. Make short pitches for quiet entries and then give it couple of shakes. Once the bait hits the bottom, hop it a few times before moving on to the next target. Being as quiet and stealthy as possible when fishing shallow water is critical. Turn off Humminbird sonars so the “ping” from the transducers doesn’t sound. Also, limit trolling motors noise and backwash as much as possible.

Click Link To Shop: Bass Angler Magazine

Hot Water And Shallow Bass Summer 2013 Bass Angler Magazine (Chad Morgenthaler pg. 58 – 60)

See new I cast products with Tackle Warehouse


Tackle warehouse

To see live I CAST coverage click the link below.



Aaron Martens at Limit Out Marine

Bassmaster Elite Series Pro Aaron Martens visits the Pacific Northwest


July 9, 2013



Pacific, Wash. –  The six time Bassmaster champion Aaron Martens will be speaking at Limit Out Marine on Saturday, July 13th at noon. Limit Out Marine is located at 898 Valentine Ave SE, Pacific, WA 98047. The seminar is free of charge, but for preferred seating please pre-register by calling 253) 863-9973.  By pre registering for the event you’ll also be entered to win door prizes from Aaron Martens’ sponsors including Megabass, Roboworm, Sunline and Bass Quest Magazine.  


Martens will be at Limit Out Marine from noon to 2:00 PM on Saturday. Martens will be speaking on multiple topics that will help you understand and catch more fish.  Martens will be answering questions and signing autographs for anyone in attendance.


Martens who grew up fishing on the West Coast now lives in Leeds, Alabama. Martens is a 14 time Bassmaster Classic qualifier, has finished in the top 10 of Bassmaster events 58 times, and has won over $2.7 million in his career.


Bobby Barrack Seminar at Gone Fishin Marine

Bobby Barrack with a typical bass via Snag Proof Frog

DIXON, Ca. – Whether or not you will be fishing the upcoming 12th annual Snagproof Open on August 3-4, if you are an angler that would like to increase your frog fishing – and frog catching skills, you simply do not want to miss the once a year seminar being held this evening at Gone Fishin Marine in Dixon.

Bobby Barrack aka the “Frogmaster” will be at the Gone Fishin Marine on Thursday, July 18th to share with those that want to know, techniques he has perfected over the many years he has used this unique bait, that will help give you the edge over the competition when the money is on the line. Some of the topics covered include:

– What is the best line to use – in what conditions?

– Colors: Does it really matter?

– Retrieve speeds/cadence

– Hook set timing

– Frog Rods and reels

– Modifying frogs – The REAL scoop on the effects of trimming skirts, painting the bait, and adding rattles

– How to spot the most productive Frog water

Bobby Barrack is one the top bass professionals in the west, and is for sure one of the top guides on the California Delta. Spending more than 200 days a year on the river, he knows where the big ones live and how to make them eat!

So make your way down to the Gone Fishin Marine in Dixon, at 6pm promptly, and join us for a special seminar featuring the absolute master of the Snag Proof top water frog!

See you all there!

For more information about the Aug 3-4 12th annual Snag Proof Open event go to www.snagproof.com or www.anglerspress.net

Gone Fishin Marine is located in Dixon California – 707.678.1600

Gone Fishin Marine Map

Vexilar SONARPHONE Turns Cellphone into Sonar

As the name implies, SONARPHONE turns your smart phone or tablet into a fully functional sonar system that will rival any high end sonar on the market today. Using Patented Wi-Fi signal technology to transmit to smart phones or tablets. You don’t need cell phone coverage to use it, the SONARPHONE will work anywhere in the world. The SONARPHONE creates its own WiFi hotspot and you can share your signal with as many people as you wish, the software App is downloaded for free from the App store and works with both Android and iOS systems.

SONARPHONE will be offering limited world-wide distribution in 17 languages in 2014 and is available in three different configurations: The T-POD, a completely portable floating WiFi transmitter that can be cast from shore or pulled behind your boat, canoe or kayak. The T-BOX options come in either a portable system with a carry case to hold the battery and suction cup mount to put on your boat or you have the more permanent versions that securely mounts in your boat and uses your on board, 12 volt battery supply for nearly unlimited run time. All SONARPHONES come with a neoprene arm band so you will have easy and safe access to your phone display at all times.

Product Details

Item #:
SP100 SONARPHONE w/transducer pod
Suggested Retail Price:
Item #:
SP200 SONARPHONE w/ HS transducer
Suggested Retail Price:
Item #:
SP300 SONARPHONE w/ HS transducer w/porta case pack
Suggested Retail Price:
$199.95 – See more at: http://www.thefishingwire.com/story/292887#sthash.dvn9yXoh.dpuf

Lucky 7 Graphics and Wraps joins RB BASS Group of sponsors!

Lucky 7 wrap

Lucky 7 Graphics and Wraps joins RB BASS Group of sponsors!

Call us: 916.708.7420
Email us: info@LuckySevenGraphics.com

Lucky Seven is a one stop graphics service shop. We specialize in vehicle wraps, vehicle graphics, trailer wraps, watercraft wraps, motorsport graphics, banners, signage, branding and marketing solutions!

Utilizing the latest technology in digital printing that provides quality photo realistic graphics to your project big or small. Quality will not be compromised when it comes to your design, your print quality nor the installation process. We are a small business that specializes in creating the best marketing possibilities for your business.

There is no better “Bang for your buck” than mobile advertising. A vehicle wrap will give you the biggest impact for visual impressions in front of potential clients compared to radio ads, internet marketing, yellow pages and telemarketing agencies. At a one time fee you have a 24/7 billboard that follows you around LOCAL future clients. If broken down monthly wraps can be done as cheap as $67 PER MONTH!

After 3-5 years and you are looking to change your wrap out or even sale the vehicle the wrap can simply be pulled off and actually saves the paint which saves your resale value of the vehicle! The wrap is printed on our state of the art 64″ Solvent Wide-Format printer and gets a UV protection laminate to go on top of the print. After the pressure sensitive vinyl is professionally installed on your vehicle you will not only have a huge daily billboard but also be protecting the original paint at the same time!

No job is to small from vinyl cut window stickers, to full blown branding and vehicle wrap outfitting Lucky Seven has you covered!

Motorsports Graphics

Being involved in Motorsports for 13 years, Lucky Seven also strives to provide racers great marketing plans to land potential sponsors. Not only do you need your car to be fast but you also need it to look good for your fans and sponsors, Lucky Seven can help do that. After we create a stunning design let Lucky Seven turn that design into reality with a race wrap for your team.

Use professionally designed graphics help gain the local sponsors that help get you to the race track! With digital printed graphics the possibilities are endless with graphics. We can incorporate a whole wrap around one main sponsor to gain them the maximum exposure possible using motorsports marketing.


Lucky Seven Graphics specializes in not only vehicle wraps & graphics but digital printing in for small & large businesses. No job is to big or to small as we cater to superior customer service, best materials on the market & professional installations. We are not limited to just vehicle graphics as below will show a full line of services that we offer. If you do not see a service listed feel free to contact us and we will see if we can help you with your upcoming projects!


  • Vehicle Wraps
  • Car Wraps
  • Vehicle Graphics
  • Vehicle Lettering
  • Truck Lettering
  • Vehicle Spot Graphics
  • Color Change Vehicle Wraps
  • Hood Wraps
  • Roof Wraps
  • Trailer Wraps
  • Boat Wraps
  • Bass Boat Wraps
  • Wall Wraps
  • Wall Graphics
  • Box Truck Wraps
  • Banners
  • Racing Graphics
  • Racing Wraps
  • Motorsport Design Layouts
  • Motorsport Sponsorship Proposals
  • Graphic Design Services

We are proud to use the best quality materials on the market such as 3M, Avery & Oracal and we do everything in house from design, print to install so we can guarantee you the lowest pricing possible. We look forward to working with you on your next project!



Brian Orange joins RB BASS Group!

Brian Orange

Brian Orange joins RB BASS Group!


Name: Brian Orange
Fishing style:  Reaction / Dart Head
Favorite seasons: Spring / Summer
Favorite Lakes:  Eastman, Pineflat, Millerton, McClure, Don Pedro, Delta.
Rods: Dobyns / G Loomis
Reels: Revo left handed/ Shimano left handed
Line: Berkley 100% fluorocarbon / Berkley Trilene Big Game
  About me:   I’m a 5′ 10″ 39 ayear old with a great wife and three children. Been tournament fishing since 1995. Whether punching with a 1oz weight on the Delta or throwing a 1/16 darter on Pineflat. I enjoy fishing for the compition. Also for the fact fishing changes every time your on the water and keeps you thinking. I have fished most of the circuits out there from ABA to New Bass. 100% Bass to West Coast Bass. BassMaster Pro-Ams to clubs. I am currently fishing Best Bass Tournaments and trying to move up the next level. Hope to see you on the water.  Brian

Texas Team Trail Presented by Cabela’s Announces 2014 Schedule

texas team trail
NORMAN, Okla.- The Texas Team Trail presented by Cabela’s (TXTT) recently unveiled the 2014 event schedule, which includes a couple of new stops along with some familiar favorites.

The regular season will kick off on Feb. 15, 2014 at Sam Rayburn Lake. If history holds true, the event should be a heavyweight shootout. The following month, the TXTT will return to Lake Ray Roberts, which produced a four-fish, 30-pound stringer this season.

In April, the TXTT will visit Lake Texoma for the first time. A favorite between both Texas and Oklahoma anglers alike, Texoma promises to be an excellent test. Finally, the 2014 regular season will wrap up May 3 when the TXTT returns to Lake Livingston.

The two-day, entry-fee Championship is scheduled for June 7-8 on legendary Toledo Bend Lake and will once again feature higher payout and contingency prize opportunities.

2014 TXTT scheduled events:

Feb. 15 – Sam Rayburn Lake
March 15 – Lake Ray Roberts
April 12 – Lake Texoma
May 3 – Lake Livingston

Championship – June 7-8 – Toledo Bend Lake

For additional information, anglers are encouraged to call 210-788-4143 or check out the TXTT website at www.texasteamtrail.com. Site visitors can register for events, review the television schedule, get official Texas Team Trail gear and view results.

Along with title-sponsor Cabela’s, Texas Team Trail has also welcomed Lucas Oil®, Ranger Boats, Stratos Boats, Triton Boats, Evinrude®, Minn Kota®, Talon, RAM Trucks, Lowrance, Power-Pole, General Tire, Boater’s Insurance®, Amphibia, Protect the Harvest and Arctic Ice as official partners. –


James Everhart joins RB BASS Group!

James everhart promo picture

James Everhart joins RB BASS Group!

We would like to welcome James Everhart to the RB BASS Family. James will provide coverage in the Central California region.

“Its what we do”

Name: James “Big Ed” Everhart
Age: 41
DOB: 10/25/1971
Weight: 270
Boat: 21′ Nitro / 18′ Champion
Truck: Dodge Ram 1500
Motor: 200 Johnson / 150 Mercury
Fishing style: Power/ Junk 
Favorite seasons: Spring/ Fall
Favorite Lakes: Berryessa, Oroville, Clearlake, Shasta, Almanor, Collins, Delta.
Rods: Dobyns / Abu Garcia 
Reels: Revo / Shimano
Line: Berkley 100% fluorocarbon 
Web site: Bigedfishing.com
I have been a front of the boat tournament angler for 9 years. I have made every T.O.C in  every circuit I have fished, (when I have fished the full season in those circuits). I have fished in  the ABA, WON Bass, Future Pro tour, the B.A.S.S Federation. 100% bass and Anglers Choice. I have been a tournament winner six times in major tournaments and more than twenty wins in smaller tournaments. I’ve been angler of the year runner up three times in my career but have my eyes firmly set on that prize. I love this sport and only want to push forward with my career. I am currently in college trying to reach my goal of earning a marketing degree. I want to work in outdoor marketing as long as possible.  

James website

Josh Barnett joins the RB BASS Group!

Josh Barnette

Josh Barnette joins the RB BASS Group!

We would like to welcome Josh Barnette the the RB BASS Group. Josh will give us coverage in the Ohio area.

“Its what we do

Josh Barnette

Hometown : Arcanum, Ohio
Birthday : May 11
Favorite Music : Country & Southern Rock
Home Lake(s) : Grand Lake St.Marys & Indian Lake
Favorite Lake : St. Clair
Favorite Technique : Pitchin and Flippin
Primary Fishing Strength : Shallow water
Boat : Triton w/ dual Power Poles ; Humminbird Elect ; Minn Kota
Tow Vehicle : Chevy Tahoe
Sponsors :
* Kustom Kicker Jigs ( national prostaff manager)
* Snack Daddy Lures
* BassKnuckles
* Elite Rods
* Simms
* Eco Pro Tungsten
* BigBassUSA
* Solar Bat Sunglasses
* IMA Baits
* Optimum Baits
* Zeko Shoes
* Ardent Reels
* Morgans Custom Baits

About me :
    I am a single parent of my 3yr old son Cameron. I work at Cardinal Ethanol in Winchester Indiana, been there since the opening. I have been fishing tournaments for about 11 yrs and my competitive juices still flow very strong. I have a passion for this sport that is unimagineable.
    Next year i will be fishing the B.A.S.S Northern Opens or the Southern Opens. I want too pursue my dreams in the fishing industry whether it is by making it on the tournament scene or another avenue within the industry.

Josh Barnette
* Owner – Mid Ohio Reel Cleaning and Tuning
* KustomKicker Jigs National ProStaff Manager
* Elite Rods ProStaff
* SolarBat ProStaff Team
* BassKnuckles ProStaff Team
* BigBassUSA ProStaff
* Snack Daddy Lures ProStaff
* Simms ProTeam
* Eco Pro Tungsten Team
* IMA Prostaff
* Optimum Baits ProStaff
* Zeko Shoes ProStaff
* Ardent Reels ProStaff
* Morgans custom Baits ProStaff